Waterproof cameras do help plumbers in carrying out sincere sewer line inspections.But, there are certain precautions you need to maintain, before, while, and after using the drain camera in Sydney to ensure it is working properly. This post will list certain precaution tips when using a waterproof camera to carry out inspection.
Precautions before using the waterproof camera
Check the battery of the camera and inspect if there is any scratch or crack in it. Also ensure to make a thorough inspection on the terminal covers.
Check if the rubber seals of the camera are free from any external object like hair strand, dust, sand, or liquid. If found, wipe it away with a clean cloth.
Avoid touching the batter and terminal covers of the camera with wet hands and make sure these surfaces do not touch the sewer water when inserted inside the pipeline.
The camera’s waterproof performance is enhanced with a glass cover fitted before the camera. Make sure you clean the glass of the drain camera in Sydney and prevent it from encountering water or any foreign body.
Precautions when using the camera
When inserting the waterproof camera inside water, make sure it does not enter a depth more than ten meters.
Do not keep the waterproof camera underwater for more than two hours consecutively.
Avoid using the camera in hot spring or in extremely hot water.
Make sure you do not leave the camera on a sandy surface as this can affect the operating temperatures, causing the speaker to become clogged with sand.
Tighten the terminal covers and the battery properly before inserting the camera inside the pipeline, as it can prove to be defective for the battery, making it non-operative.
Avoid wiping the camera with suntan oil or sunscreen as it can cause discoloration of the camera surface. In case you have used oil to rub the camera surface, wash it off immediately with warm water.
Do not force the CCTV camera equipment Sydney inside the pipeline as it can increase complications with respect to the waterproofing performance of the camera.
Precautions after using the camera
Do not open the battery with wet hands.
Wipe off any water droplet present on the surface of the camera and let it dry for a significant amount of time in a warm place.
Wipe off the waterproof seals if you find any sand or dust particle on it.
If you have used the camera in dirty water, turn it off for some time and make sure the terminal covers and battery are firmly closed.
Check the waterproof seals on an annual basis.
Moreover, plumbing companies are taking risks amid the outbreak of the deadly coronavirus seriously. Therefore, they are implementing several protective steps to ensure the staff and the customer’s safety measures.
These are the following measures followed by locksmiths on reaching your property:
They do not greet by shaking hands on arrival
They stand at a distance of 1.5 meters
They wear gloves while performing their duties
Disinfectant everything before starting their work and after finishing it
These are precautions you need to follow when using a CCTV camera equipment Sydney. Get in touch with a reliable plumbing company to carry out the sewer line inspection.
Comments